4 Best 3-Monitor Stands: Expert Picks for Your Setup

Customer Review: The media could not be loaded. Great quality for the price. I attached several pics and a video of it mounted to my electric sit/stand desk. I did order a thick metal plate designed for these mounts to sandwich on the desk being that my desktop is particle board I was concerned it would snap the desk where it clamps on at. I’m running 3 older 24″ dell IPS monitors that are a bit heavier than most newer monitors and it handles them just fine. The gas powered arms were a little tricky to get adjusted just right and I still have one that needs some tweaks. When I adjust the screen menus with the screen buttons the monitor will slightly raise up on its own. Kinda annoying but I have not found a way to lock the arms in place once you have them setup the way you like. There is also only one screw underneath on the clamp and can be somewhat difficult to get tightened as the entire unit wants to turn. There are other units out there with dual screws that look like they would work better and prevent the headache of turning the entire setup when tightening. Not to mention they seem more secure. The cable management is great as I have two separate inputs going to each monitor and the power cable. All fit nicely in the sleeves and clips. Lastly there are no input plugs on this stand. Not really a con as you can clearly see that in the pictures and not docking any stars for it either. However there are other units out there that have built in USB ports, mic ports, etc that run around this same price point. All in for the price I would absolutely buy again and has been rock solid for a little over a month now with my sit/stand moving up and down multiple times a day with no wobble. Oh and the detachable vesa mounts that just clip into the arms are an amazing thing when installing your monitors. Just buy it. Hahaha

Customer Review: Overall I love this item and unlike my last purchase, which I had to return, I plan to keep this one.PROS:Has two extension arms, meaning you have the middle part that connects to each side, plus an arm AND an additional arm, most would only have the middle part and one extension arm. This means for guys like me with 3 32″ monitors you have the option of having them sit horizontally without having to sacrifice, IE one monitor is partially blocked by the other. As I noted I had to return a different brand and that was because of this.Weight – My monitors are roughly 15 1/2 pounds each and I didn’t have any issues moving the arms around with the monitors connected. Says a lot about the stability that I’m talking about this product being able to hold a 15 lb monitor on a second arm extension, as opposed to one.Install time – About 10-15 minutes, 20 if you factor that I’m a moron who didn’t check placement before setting everything up, then forced to disassemble and reassemble in the proper area. Bad joke aside was straight-forward setup but use your own screwdriver, the one that comes with this is limited.Range – Similar to what I’ve used in the past. Easy to lift upwards, downwards, tilt the monitor, rotate to portrait. Standard stuffCONS:Only one. The middle pole is a decent size, but not tall enough for me. If you’re like me you want your monitors higher to reduce strain on your eyes (I’m 6′ so I prefer not having to look downwards so much). In my situation even when I had the middle area at it’s highest my middle monitor was too low. I ended up using a stand for my middle monitor instead of connecting. Checked with the manufacturer and unfortunately there wasn’t an option to buy a taller stand or add an extension, so while I give this 5 stars IMO it’s really 4.5 and only because of this limitation.TLDR – Great product, no regrets purchasing it. Can hold 3 horizontal 32″ monitors but middle might be lower than you prefer.

Customer Review: This 3 monitor mount was exactly what I was looking for! I needed something sturdy and stable to mount my 3 24″ monitors to my standing desk. I have been using it for a few months now and overall it has been working great. I would definitely buy this mount again if my boyfriend needs a 3 arm mount or someone needs a recommendation for one.Putting the mount together wasn’t too complicated following the directions though there are quite a few pieces to put together. It can definitely be done by one person but is much easier if you have an extra set of helping hands.It is really nice that the plates for the monitors can be mounted to the monitor first and then slid onto the mount arms after you’ve mounted the stand on the desk. It makes the process way easier so you don’t have to worry about having too much weight at once and accidentally breaking something. The mount also comes with screws to mount the plates on either standard monitors or curved monitors. I only have standard monitors but I think it is great that they provide both sets and include in the instructions how to install the plates for each monitor type. It would make changing to curved monitors super easy if that is something I decide to do in the future.The only issue I’ve had with the stand is that there is some wobble on the side monitors when the desk is bumped (not just a small bump here or there but if you give it a good bump there is a little wobble) or while actively raising the desk to a standing position but I kind of expect that from any arms that are gas spring arms. They are meant to be able to make easy adjustments so they do need a little give.

Customer Review: The MOUNTUP MU0006 Triple Monitor Stand Mount has completely transformed my workspace. I was dealing with a cluttered desk and awkward monitor angles, but this mount delivered exactly what I needed: a clean, ergonomic, and highly adjustable setup.Setup was a breeze—the instructions were clear, and all the hardware was well-labeled. It took me under 20 minutes to install using the C-clamp option, and the quick-release VESA plates made attaching the monitors super easy.The gas spring arms are smooth and responsive, allowing for precise tilt, swivel, and height adjustments. I use three 24-inch monitors, and the stand holds them rock-solid with no wobble, even during intense work or gaming sessions.One of the standout features is the cable management system. It keeps everything neat and out of sight, which not only looks great but also reduces clutter and distractions. The overall build quality is excellent—sturdy steel construction with a sleek, professional finish.If you’re looking to reclaim desk space, improve posture, and streamline your setup, this mount is a fantastic investment. Just make sure your monitors are within the size and weight limits (up to 27″ and 17.6 lbs per arm), and check your desk thickness for compatibility.Highly recommended for anyone with a triple-monitor setup who wants a reliable, ergonomic, and visually clean solution!

Customer Review: This is an extremely sturdy monitor stand. Easily assembled in less than 20 minutes. Instructions were simple. The hex tools came with the stand, but you just need a Nr 2 Phillips Screwdriver for the bolts mounting the VESA plate to the monitor. Take note that this stand has a heavy base to hold larger/heavier monitors up to 22 lbs, but does not take a lot of space. I chose this variant so that it could handle my heavy 24-inch Planar monitor. The included cable management clip was a nice touch. Rotation and tilt feature moves easily and has decent range. I’m very happy with my purchase and it was available for overnight shipment in my region.

Customer Review: Amazing value for this stand. I needed a stand with more degrees of freedom than the original one that came with my monitor, and this stand (which was inexpensive relative to the cost of the monitor) was a great purchase. The base of the stand is a little bulky/high, and the soft material on the bottom of it can rub off very easily if you let the stand catch the back edge of your desk. Otherwise though, the stand is extremely easy to install, and it provides far more degrees of freedom for rotation and translation than the original stand for my monitor. Now my monitor is sitting at a comfortable viewing angle closer to my desk tilted slightly upwards toward me.Just keep in mind that you have to tighten down the height and tilt adjustments (the things that would be affected by gravity). So, if you want to adjust those frequently, this stand might not be a great fit for you. That said, it does provide a hidden but easy-to-access spot to store the keys needed to loosen it up to make those adjustments. So, if you need to make those adjustments, you’ll always have quick access to the necessary tools.Highly recommended for its price in particular.

Customer Review: First off has all the tools needed to assembly which was nice. I’m sure it would have been easier with the tools that I have but I decided to go with what came in the box. Took me roughly about 15 minutes to assemble after reading the instructions. Once assembled though it was easy to adjust and set the angles that I wanted. It’s range of motion is good to where I could set it perfectly to my seating position. Just make sure to tighten all the adjustment points before trying to adjust as it needs to be tighter than you think. the cable management is actually really good I was surprised at how easy it was. Just slide off the covers and route the cables. The quality of the parts is comparable to some of the higher end stuff out there, cough Fellowes. The price of this monitor arm set up blows me away at how cost effective this product is. I still can’t believe how cheap it was for the quality. Size wise it’s similar to any other dual monitor stand out there. Too be honest I wasn’t expecting much considering the price but I was pleasantly surprised. It’s a good product for what you are paying for and I expect it to last since I don’t plan on moving my monitor at all.

Customer Review: Definitely worth the price. I bought the 3-monitor setup. The product quality is quite high, screw threads are machined very accurately, parts fit together like a glove. It feels like its price and has good instructions. Wasn’t difficult to install, I did read the instruction manual but basically watched the guy in their video put it together and I followed along with the video. I’m glad they emphasized multiple times the necessity to screw the tensioner at least 10 times because it really does take that many full turns before the support starts to loosen up. The only knock I have on them is the fact that the tiny tension screws for both the top arms were not in the arms when they shipped. I happened to spot them at the bottom of the shipping carton so if you buy one of these, be on the lookout for them because they’re very tiny and if you don’t find them (or have them), you’ll have to call their customer service. You’ll probably spend more time adjusting the mount than putting it together, but that’s where the fun is… tweaking it to your satisfaction. You can truly tension this thing to your liking. You don’t want it to move… just torque it a little more. I have mine set to where it’s fairly rigid, but I can tweak it a little if I want to. Range of motion… excellent for the two outer monitor arms. What I would love to see is a version of this mount where the center monitor is also adjustable in the direction towards the user. You can rotate it left and right and up and down but you can’t bring it forward and backwards.